EVO II Pro Support
FAQ
We've put everything you need to get started with your EVO II Pro right here. If you still have questions browse the topics on the left.
-
Aircraft
-
Image Transmission
-
Camera
-
Battery
-
Remote controller
-
Vision system
-
Firmware upgrade
- Aircraft
- Image Transmission
- Camera
- Battery
- Remote controller
- Vision system
- Firmware upgrade
Q: What is the difference between EVO II and EVO II Pro?
The only difference between the two products is the PTZ camera, and the rest of the performance is the same.
Q: What is the the maximum flight time of the EVO II Pro?
40 minutes max flight time (when flying in a steady environment).
Q: Is the EVO II Pro waterproof?
No.
Q: What is the maximum wind resistance of the EVO II Pro?
39mph.(17m/s).
Q: What is the effective image transmission distance?
Under the FCC standard, the maximum image transmission distance is 9km; under the CE standard, the maximum image transmission distance is 5 km.
Q: What should I do if the image transmission signal becomes weak
during flight?
Check your surroundings for potential interference factors and then adjust the orientation of your antennas to enhance signal strength.
Q: Can I change the gimbal mount?
Yes.
Q: What types of shooting formats does the camera support?
Photo format: JPEG (default) + DNG; Video format: MOV (default) + MP4.
Q: What camera modes are available?
Single shooting, continuous shooting, timing, pure night shooting, long exposure, HDR imaging.
Q: What is the zoom range of the camera?
1-8x zoom and 3x lossless zoom.
Q: What are the advantages of the EVO II Pro camera in shooting video?
It can shoot 5472x3076 resolution 6K video at a bit rate of 120Mbps, and supports 4K HDR video shooting.
Q: How long does it take to fully charge the battery?
It takes approximately 90 minutes to fully charge each battery.
Q: How does one maintain the battery?
1. Do not expose the battery to temperatures
below -10°C or above 40°C, which will shorten
the battery life and may cause fire, explosion or
other permanent damage;
2. Do not charge
immediately after flight; it is recommended to
charge the battery after it has dropped to room temperature;
3. The ideal charging environment temperature of the
battery is 10 °C~30 °C;
4. The ideal storage environment
temperature of the battery is 22 °C~28 °C. When storing,
it should be waterproof and moisture-proof, and avoid sunlight;
5. Recharge and discharge the battery every 3 months or
so to keep the battery active.
Q: Can the battery be used in a low
temperature environment?
Using the battery in a low temperature environment may reduce the battery life. For optimal performance, it is recommended to keep the battery temperature above 15 °C before flying.
Q: Can the battery be carried on
board?
A single battery contains 82Wh. According to airline requirements, the battery can be carried on board.
Q: Can the remote controller of EVO II and
EVO II Pro interchangeable?
Yes.
Q: Does the remote controller support HDMI output?
No.
Q: How many ports does the remote control have?
There is a Micro USB port and a Type-A port at the bottom of the remote controller, which can be used for connecting external devices and charging.
Q: Does the remote control have custom buttons?
There are two customizable buttons on the back of the remote controller, and 4 functions can be customized through the APP.
Q: The body is equipped with and how many vision sensors?
There are 12 in total, with two vision sensors each on the front, back, left, right, up, and down.
Q: Can the downward fill light be turned on and off manually?
It can be turned on or off manually, or it can be automatically turned on or off according to environmental conditions.
Q: How to upgrade the firmware?
You can download the firmware package manually through the official website, or update the firmware through the Autel Explorer application.
Q: After downloading the firmware package, can I disconnect the network
to upgrade?
Yes.
Q: What are the factors that can cause the upgrade to fail?
A. If the device is turned off during the
upgrade process, the upgrade will fail.
B. If the network is interrupted while
downloading the firmware package, the upgrade will fail.
C. Only when the remaining battery power of the device
is ≥ 50% can the upgrade be performed.
