Compared with other products in the EVO II series, it mainly adds industry expansion accessories (spotlight, loudspeaker, strobe, RTK modules).

The EVO II industry version comes standard with an Autel smart remote control, equipped with a 7.9-inch retina touch screen, using True Tone display technology, with a resolution of 2048*1536 and a maximum brightness of 2000nit, four times that of ordinary mobile devices. And it is compatible with other models of EVO II series drones.

902-928 MHz; 2.400-2.4835 GHz; 5.725–5.850 GHz.
*Working frequency bands vary by country and model.

It can assist the camera to shoot within about 30 meters.

There is a spotlight icon in the lower left corner of the image transmission interface, and you can click to turn off/on the spotlight or select the intensity of irradiation.

After testing, in an environment of 65db, the sound intensity of the drone at different distances from the test point is: 120dB@1m; 88dB@60m; 70dB@110m.

Depending on the actual environment, the maximum distance can be up to 5000 meters.

Disassembly accessories
1) Make sure the aircraft power is off.
2) Loosen the screws on both sides of the accessory and remove the accessory.
3) Insert both ends of the protective cover into the corresponding slots.

Mounting Accessories
1) Make sure the aircraft power is off.
2) Gently twist to remove the protective cover of the expansion accessory interface.
3) Align the screws on both sides of the accessory with the screw holes, and tighten the screws

It takes about 90 minutes to fully charge each battery.

If the battery is used in a low temperature environment, the battery life will be reduced, please arrange the flight time reasonably. To get the best performance from the battery, it is recommended to keep the battery temperature above 15 °C before flying.